Service Procedures; Control Assembly - MG MG6 Series 2011 Service Manual

HVAC-ATC

Service Procedures

Control Assembly

Remove
1. Disconnect battery earth lead.
2. Release 3 clips securing centre console upper finisher
to fascia.
3. Release 9 clips and centre console surround from
centre console.
4. Disconnect Air Conditioning (A/C) control multiplugs.
5. Remove 4 screws and release clips securing A/C
controls to centre console. Remove A/C controls.
Version 2.0
Refit
1. Connect A/C controller multiplugs.
2. Position A/C controller to finisher and secure with
screws to 2 Nm.
3. Position finisher to centre console and secure clips.
4. Position up finisher to centre console and secure clips.
5. Connect battery earth lead.
HVAC System
507