Ÿ Activation Of Door Lock And Anti-Theft Mode; Door Unlock And Release Of Anti-Theft Mode; Lock Function Alarm - MG Hector Owner's Manual

KEYS, DOORS AND WINDOWS
Activation of Door Lock and Anti-theft
Mode
1. Close all the windows.
2. Turn the ignition key to LOCK position
and pull out the key (if mechanical ignition
key is configured).
3. All passengers leave the vehicle.
4. Close all doors and the engine hood.
5. Press and release the remote lock button.
All doors are locked. The hazard warning
lamp will flash twice, and the immobilizer
is activated.
As for a vehicle configured with ENGINE
START STOP function, only when the ignition
switch is at LOCK position can the
transmitter activates the immobilizer system.
Note
The anti-theft mode must be activated
with the transmitter.
• Warning sound
Under the anti-theft state, when the
unlock button on the transmitter is not
pressed and any of the doors or liftgate is
forced opened in an abnormal way
(including use of a key), the system will
12
make the hazard warning lamp flash and
emit warning sound.
• To stop warning sound
Press and hold the lock, unlock or liftgate
button on the transmitter for about 2s or
turn the key to ON position to top the
warning sound; if not, the warning sound
will be ended automatically after 30s, and
the anti-theft mode is activated again. If
t h e s y s t e m f a i l s t o d o s o , i t i s
recommended to have the system
checked by the MG Authorised Service
Center.
Door Unlock and Release of Anti-theft
Mode
1. Press the unlock button on the remote
control once.
• All doors are unlocked.
• The hazard warning lamp flashes once.
• The anti-theft state is released.
2. Press and hold the liftgate open button for
2s.
• The liftgate is opened.
• The hazard warning lamp flashes once.
• The anti-theft state is released.

Lock Function Alarm

The horn will buzz thrice and the hazard
warning lamp will flash thrice to indicate that
the doors are not locked successfully if the
remote lock button is pressed or passive
locking is conducted when the door lock
conditions are not met. These situations
include:
1. There is a door not closed (including
liftgate)
2. The door lock is under thermal
protection
3. The ignition switch is not at the LOCK
position
4. The passive entry system (if configured)
detects a legal key in the vehicle.
Caution
Never leave a child or pet unattended in
the vehicle. Otherwise, it may cause
i n j u r i e s o r d e a t h d u e t o h i g h
temperature in the vehicle.