Safety Catch - Bonnet; Lock - Bonnet - MG MG6 Series 2011 Service Manual

Front Closures
Safety Catch – Bonnet
Remove
1. Open bonnet.
2. Remove 2 nuts securing safety catch to bonnet and
remove safety catch.
Refit
1. Position safety catch to bonnet and tighten bolts to
7–10Nm.
2. Close bonnet.
Version 2.0
Lock – Bonnet
Remove
1. Open bonnet.
2. Remove 2 bolts securing bonnet lock to bonnet locking
platform and remove lock.
3. Release cable from bonnet lock.
Refit
1. Position bonnet lock and fit cable.
2. Position bonnet lock to bonnet locking platform, fit
bolts and tighten to 7–10Nm.
3. Close bonnet.
Body Systems
801