Service Procedures; Handle - Outside - Front Door; Door Assembly - Front - MG MG6 Series 2011 Service Manual

Doors

Service Procedures

Handle - Outside - Front Door

Remove
1. Remove private lock.
Private Lock Lock - - - Front Front Door
Private Private Lock Front
2. Move handle backwards then rotate rear of handle
outwards and remove by releasing from front tags.
Refit
1. Using a piece of string loop round door inner release
lever, pull outwards to engage behind outside handle
release lever.
2. Fit door handle to front tags and rotate to locate into
rear door aperture.
Caution: Ensure door handle gaskets are fitted correctly.
3. Fit private lock.
Private Lock Lock - - - Front Front Door
Private Private Lock Front
Version 2.0
Door Remove Remove
Door Remove
Door Refit Refit
Door Refit

Door Assembly - Front

Remove
1. Disconnect battery earth lead.
2. Open door.
3. Release harness sleeve and disconnect multiplug from
'A' post.
4. Remove upper hinge cap nut.
Caution: Please protect paint from scratch.
5. Remove lower bolt from lower hinge.
Caution: Please protect paint from scratch.
6. With assistance, lift door up until centre bolt comes
Body Systems
773