Bush And Bracket-Front Lower Arm - MG MG6 Series 2011 Service Manual

Front Suspension
6. Using special toolT32025 position spring ring
onT32023 , usingT32024 push spring ring until
position on outer ball joint boot.
7. Engage upper spring ring to ball joint.
8. Fit front lower arm.
Lower Lower Arm-Front Lower Arm-Front Refit Arm-Front Refit Refit
Version 2.0

Bush and Bracket-Front Lower Arm

Remove
1. Remove lower arm.
Lower Arm-Front Arm-Front Remove Remove
Lower Lower Arm-Front Remove
2. Using T32001,T32007 and T32009, remove front
lower arm bush and bracket.
Refit
1. Clean front lower arm to bush and bracket mating faces.
2. Position bush and bracket to front lower arm, ensure
bush is aligned to front lower arm according to the
mark.
3. Using T32008,T32001 andT32010 press bush and
bracket to front lower arm until bush face lines up with
mark on lower arm.
4. Fit lower arm.
Lower Lower Lower Arm-Front Arm-Front Arm-Front Refit Refit Refit
Suspension System
555