MG MG6 Series 2011 Service Manual page 4

Repairs and Replacements
Parts
When replacement parts are required it is essential that only
our company's recommended parts are used.
Attention is particularly drawn to the following points
concerning repairs and the fitting of replacement parts and
accessories.
• Safety features and corrosion prevention treatments
embodied in the vehicle may be impaired if other than
SMC recommended parts are fitted.
• Torque wrench setting figures given in this Manual must
be used.
• Locking devices, where specified, must be fitted. If the
efficiency of a locking device is impaired during removal
it must be renewed.
• The terms of the vehicle warranty may be invalidated by
the fitting of parts other than SMC recommended parts.
All SMC recommended parts have the full backing of the vehicle
warranty.
SMC Dealers are obliged to supply only SMC recommended
parts.
Special tools
Special tools have been developed to facilitate removal,
dismantling and assembly of mechanical components in a cost
effective and time efficient manner. The use of special tools
also helps prevent the potential for damage to components.
Some operations in the manual cannot be carried out properly
without the aid of the relevant special tools.
Special tools can be obtained from the following supplier.
Shanghai Xiangzhi Industrial Development Co., Ltd
Address: 17F, Building C, No.900, Yishan Road, Shanghai
Post Code: 200233
Tel: 021-54234810
Version 2.0 2