MG MG6 Series 2011 Service Manual page 674

Interior Fitting
18. Remove 2 bolts securing fascia support rail to bulkhead.
19. Remove 4 bolts securing both ends of fascia support
rail to body.
20. With assistance, remove fascia and fascia support rail.
Refit
1. With assistance, position fascia and support rail to
body. Ensure heating and ventilation ducts are correctly
engaged in heater assembly.
2. Fit bolts securing ends of fascia support rail to body
and tighten to23-25Nm.
3. Fit bolts securing fascia support rail to bulkhead and
tighten to23-25Nm.
Version 2.0
Instrument Panel and Console
4. Fit wiper motor assembly.
Wiper Motor Motor and and Linkage Linkage Refit
Wiper Wiper Motor and Linkage
5. Position storage box and fit USB connector to the
storage box with screws.
6. Position the storage box with clips.
7. Connect multiplugs and tighten earth bolts to6–8Nm,
and pull back carpet near RH 'A' post
8. Tighten earth bolts to6–8Nm, and pull back carpet
near LH 'A' post
9. Connect fascia harness to BCM multiplugs.
10. Connect both front door to fascia harness multiplugs
and secure grommets.
11. Secure harness clip to fascia.
12. Position RH side finisher to fascia and connect multiplug
in order to connect multiplug easily.
13. Fit RH side finisher to fascia with clips.
14. Fit LH side finisher to fascia and secure clips.
15. Fit 'A' post upper trim finishers.
Upper 'A' 'A' post post Trim Trim Finisher
Upper Upper 'A' post Trim
16. Fit 'A' post lower trim finishers.
Lower 'A' 'A' post post Trim Trim Finisher
Lower Lower 'A' post Trim
17. Fit solar sensor.
Solar Solar Light Solar Light Sensor Light Sensor Sensor Refit
18. Fit instrument pack.
Instrument Pack Instrument Instrument Pack Refit Pack Refit Refit
19. Fit steering column.
Steering Column Column Refit Refit
Steering Steering Column Refit
20. Fit centre console.
Console Console Console Assembly Assembly Assembly Refit Refit Refit
21. Fit glovebox.
Glovebox Remove Glovebox Glovebox Remove Remove
22. Connect battery earth lead.
Refit
Refit
Finisher Refit Refit
Finisher Refit
Finisher Refit Refit
Finisher Refit
Refit Refit
658