MG MG6 Series 2011 Service Manual page 217

Engine Mechanical-1.8 VCT
12. Disconnect vacuum pipe from throttle body and
position aside.
Caution: Always fit plugs to open connections to prevent
contamination.
13. Remove 3 bolts securing air conditioning compressor to
mounting bracket and tie air conditioning compressor
aside.
14. Loosen nut to release gear selector cable from starter
inhibitor / position sensor.
15. Release gear selector cable from gearbox bracket.
16. Remove 2 bolts securing gear selector cable bracket to
automatic transmission and release gear selector cable
Version 2.0
bracket.
17. Remove PAS reservoir screw top and syphon fluid.
18. Remove 3 bolts securing PASreservoir to RH engine
mounting and position aside.
19. Release clip securing PASreturn hose to reservoir.
Caution: Always fit plugs to open connections to prevent
contamination.
20. Disconnect PASpump pressure sensor multiplug.
21. Remove 2 nuts and 3 bolts from PASpump and tie
aside.
22. Release clip securing return hose to coolant reservoir
Engine
201