Table of Contents
Advertisement
Body Repair
• Do
not
abrade
two-component primer to the suggested micron build.
(Tinted primer to replicate original sealer coat).
• To aid sanding use a dark coloured guide coat. (Do not
use black cellulose aerosol) Use a basecoat mix or dry
powder type.
• Abrade with dry P500 or wet P1000 grade paper.
(Minimum build of two component primer, 80 microns).
• Remove all traces of contamination using airline blower
gun and degrease.
• Apply the base coat to achieve opacity.
• After flash off of the basecoat solvents, apply Clear coat
to a minimum build of 45- 50 microns.
• Degrease area or panel that repuires repair.
• Abrade complete panel with dry P240 grade paper or
wet P800 grade paper with abrading block.For optimum
performance , finalise with wet P1000 grade paper by
hand.
• Clean panel with airline blower gun and degrease.
• Apply the base coat to achieve opacity.
• After flash off of the basecoat solvents, apply Clear coat
to a minimum build of 45- 50 microns.
Refinishing Original Equipment Painted Panels
or Two-component Material
• Degrease area or panel that requires repair.
• Abrade complete panel with Dry P240 grade paper
or abrade wet with P800 and block.
performance finalise with wet P1000 grade paper by
hand.
• Clean panel with airline blower gun and degrease.
• Apply the base coat to achieve opacity.
• After flash off of the basecoat solvents, apply Clear coat
to a minimum build of 45- 50 microns.
Version 2.0
Etch
primer;
Apply
For optimum
tinted
Paint and Coatings
836
Advertisement
Table of Contents
