Striker - Squab - Rear Seat - MG MG6 Series 2011 Service Manual

Interior Fitting
Refit
1. Fit squab cover to squab foam and secure with new C
rings.
2. Fit squab to frame.
3. Secure squab cover fastening strip.
4. Fasten squab cover zip.
5. Position zip ends within squab cover.
6. Fit squab catch cover trim and secure with clips.
7. Fit head rest guide tubes and secure with clips.
8. Fit head rest.
9. Fit rear seat squab.
Squab - - - Rear Squab Squab Rear Seat Rear Seat Refit Seat
10. Fit rear seat armrest.
Version 2.0
Refit Refit

Striker - Squab - Rear Seat

Remove
1. Press release button and pull forward.
2. Mark position of seat squab striker.
3. Remove 2 bolts securing striker to body and remove
striker.
Refit
1. Position striker to body, fit bolts and tighten to22Nm.
2. Locate rear seat squab to correct position and secure
in clips.
Seats
676