Pipe Assembly - Body Underfloor Fuel Lines - MG MG6 Series 2011 Service Manual

Engine Fuel & Management System

Pipe Assembly - Body Underfloor Fuel Lines

Remove
1. Drain the fuel tank.
Tank - - - drain drain fuel fuel Remove.
Tank Tank drain fuel
2. Release fuel vent pipe from purge control valve.
3. Release fuel feed pipe from injector rail.
4. Raise the vehicle on a lift.
5. Release fuel pipe from fuel filter.
6. Release fuel pipe from fuel tank.
7. Release 8 pipe clamps and 12 clips securing fuel pipes
assembly to body underfloor.
8. Release underfloor pipes from charcoal canister.
9. Remove underfloor fuel pipes.
Refit
1. Fit 8 pipe clamps and 12 clips securing fuel pipe
assembly to body underfloor.
2. Fit fuel pipe to charcoal canister.
3. Fit fuel pipe to fuel tank.
4. Fit fuel pipe to fuel filter.
5. Fit fuel vent pipe to purge control valve.
6. Lower vehicle.
7. Fit fuel feed pipe to injector rail.
8. Refill fuel tank.
Version 2.0
Remove.
Remove.
Refill Refill fuel Refill fuel tank fuel tank Refit. tank Refit. Refit.
Engine
325