Wipers And Washers; Front Windscreen Wiper Controls - MG GS Owner's Handbook Manual

INSTRUMENTS AND CONTROLS

Wipers and Washers

Front Windscreen Wiper Controls

The wipers and washers will only operate when the ignition
switch is in position II. Operate the lever to select different
wiping speeds:
*
• Automatic wipe （1）
• Slow speed wipe (2)
38
• Fast speed wipe (3)
• Single wipe (4)
• Automatic wipe speed adjustment (5)
• Programmed wash/wipe (6)
*
Automatic Wipe
Some models are equipped with a rain sensor fitted to the
inside of the windscreen behind the rear view mirror. The
sensor is able to detect varying amounts of water on the
outside of the windscreen. With the wiper control set
to automatic wipe (1), the variable delay will be adjusted
automatically according to the information supplied by the
rain sensor.
Note: If the sensor detects constant rain, the wipers
will operate continuously. The sensitivity of the sensor
can be altered by means of the wiper variable delay
(5).
This speed will also change with the vehicle speed. As the
vehicle speed increases, the wiping speed increases. As the
vehicle speed decreases, the wiping speed decreases.