Release Handle - Interior - Rear Door - Each; Trim Casing - Front Door - MG MG6 Series 2011 Service Manual

Body Systems

Release Handle - Interior - Rear Door - Each

Remove
1. Remove rear door trim casing.
Trim casing casing - - - rear rear door
Trim Trim casing rear
2. Remove 4 screws securing interior release handle to
rear door trim casing.
3. Remove interior release from door trim casing.
Refit
1. Position interior release handle to rear door trim casing
and secure with screws.
2. Fit rear door trim casing.
Trim casing Trim Trim casing - - - rear casing rear door rear
Version 2.0
door remove remove
door remove
door refit door refit refit

Trim Casing - Front Door

Remove
1. Disconnect battery earth lead.
2. Remove access cover from interior handle and remove
screw securing handle to door.
3. Release clips securing grab handle trim to trim casing,
remove cover and 2 screws securing grab handle to
door.
4. Carefully release 8 clips securing trim casing to door.
5. Lift trim casing and release from door.
6. Disconnect multiplug from tweeter.
7. Disconnect 2 multiplugs from window switch pack.
Doors
788