1.8Vct Camshaft Phaser Unit - MG MG6 Series 2011 Service Manual

Engine Mechanical-1.8 VCT
24. Fit drive belt front upper cover.
Camshaft Drive Drive Belt Belt Cover
Camshaft Camshaft Drive Belt
25. Fit RH engine hydraulic mounting.
Engine Engine Hydramount Engine Hydramount - - - RH RH RH Hydramount
26. Connect battery earth lead.
Version 2.0
Cover - - - Front Front Upper Upper
Cover Front Upper

1.8VCT Camshaft Phaser Unit

Remove
1. Disconnect battery earth lead.
2. Remove camshaft drive belt.
Camshaft Camshaft Camshaft - - - Drive Drive Belt Drive Belt （ （ （ new Belt
Camshaft Camshaft - - - Drive Camshaft Drive Drive Belt. Belt. Belt.（ （ （ old
3. Remove phaser unit plug.
4. Use a spanner fitted to camshaft hexagon to counteract
torque. Remove bolt and plain washer securing phaser
unit to camshaft.
5. Remove phaser unit.
Remove
1. Clean component mating faces.
2. Fit phaser to camshaft, fit and finger tighten retaining
bolt and washer.
3. Fit camshaft drive belt.
Camshaft - - - Drive Drive Belt(New) Belt(New)
Camshaft Camshaft Drive Belt(New)
Camshaft Camshaft Camshaft - - - Drive Drive Belt(Old) Drive Belt(Old) Belt(Old)
4. Support camshaft with spanner fitted to hexagon and
tighten bolt to105–115Nm.
5. Fit phaser unit plug.
6. Connect battery earth lead.
Engine
new version) new version) Remove version) Remove Remove
old version) old version) Remove version) Remove Remove
195