MG MG6 Series 2011 Service Manual page 218

Engine
at cylinder block.
23. Disconnect coolant heater hose at coolant elbow and
position aside.
24. Release clip disconnect coolant top hose from coolant
elbow and position aside.
25. Release clip securing heater hose to engine block and
position heater hose aside.
26. Depress clip and release vacuum hose from inlet
manifold and position aside.
27. Position cloth to collect spillage and carefully disconnect
fuel line from fuel rail, ensuring fuel line is positioned
aside. Intake hose removed for clarity.
Version 2.0
Engine Mechanical-1.8 VCT
Warning: The spilling of fuel is unavoidable during this
operation. Ensure that all necessary precautions are
taken to prevent fire and explosion.
Warning: Fuel vapour is highly flammable and in confined
spaces is also explosive and toxic. Always have a fire
extinguisher containing foam, CO2, gas or powder close
Caution: Always fit plugs to open connections to prevent
contamination.
Caution: Before disconnecting any part of the fuel
system, it is imperative that all dust, dirt and debris is
removed from around components to prevent ingress of
foreign matter into fuel system.
28. Release crank case breather from throttle body intake
hose and disconnect pressure hose connection from
turbocharger.
29. Release clip securing gearbox breather pipe and
position aside.
30. Disconnect transmission multiplug.
31. Open fuse box lid and disconnect 3 electrical
connectors.
32. Cut cable tie securing starter motor solenoid lead to
engine harness and position aside.
33. Remove bolt securing battery ground cable to body
and disconnect battery ground cable.
34. Release clip from bottom hose elbow, release hose and
202