Glove Box Assembly - MG MG6 Series 2011 Service Manual

Interior Fitting
4. Fit gear selector indicator assembly with clips.
5. Position wood trim and connect electrical multiplug
and connectors.
6. Fit the wood trim and secure clips.
7. Fit trim with screw.
8. Fit ashtray and close lid.
9. Fit automatic A/C control assembly.
Automatic Air Air Conditioning Conditioning Control
Automatic Automatic Air Conditioning
Refit Refit Refit
10. Fit gear knob.
Selector Lever Selector Selector Lever Knob Lever Knob Refit Knob
Version 2.0
Control Assembly Assembly
Control Assembly
Refit Refit
Instrument Panel and Console

Glove Box Assembly

Remove
1. Open glove box and release the clips securing air
damper to glove box.
2. Apply inward pressure on side of glove box and release
clips from fascia.
3. Remove circlips retaining glove box hinge pins.
4. Remove hinge pins and glove box assembly.
Refit
1. Fit glove box to fascia and secure with hinge pins.
2. Fit the circlips to hinge pins and secure the glove box
to fascia with clips.
3. Fit the air damper to glove box with clips.
656