Operation - MG MG6 Series 2011 Service Manual

Seats

Operation

Manual Seats
1. Lumbar adjustment handwheel (driver's seat only)
2. Backrest forward/recline lever
The manual seats can be adjusted by means of levers and rotary
controls to adjust the seat to suit individual requirements.
Driver's Seat
The seat slide forward/rearward lever (4) located on the front
of the seat trim. Lifting the lever allows the seat to move
backwards or forwards to the desired position. The seat locks
in the selected position when the lever is released. A cushion
raise/lower adjustment lever at the side of the outer seat trim,
is used to adjust the seat height. Pumping the lever repeatedly
up or down, raises or lowers the seat height, respectively.
Backrest forward/recline lever enables adjustment of the
backrest position. Pulling the lever up releases the backrest.
With the backrest released, it can be moved backwards or
forwards as required. Releasing the lever locks the backrest
Version 2.0
3. Cushion raise/lower adjustment lever (driver's seat only)
4. Seat slide forward/rearward lever
in the required position. A lumbar adjustment handwheel is
located on the outer face of the driver's backrest and allows
for adjustment of the backrest lumbar cushion. Rotation of
the handwheel in a clockwise direction softens the lumbar
cushion and counter-clockwise rotation hardens it. Rotation
of the handwheel pulls a cable which is connected to a ribbed
lumbar support. As the cable is pulled the ribbed support is
deflected which hardens the lumbar cushion.
Passenger's Seat
The passenger's seat is adjusted in the same way as the driver's
seat. The forward/rearward adjustment is operated by lifting
the lever located on the front of the seat. The side lever allows
the adjustment of the backrest position.
Interior Fitting
669