1.8Vct Engine And Manual Transmission - MG MG6 Series 2011 Service Manual

Engine

1.8VCT Engine and Manual Transmission

Remove
1. Position vehicle on a 2 post ramp.
2. Drain cooling system.
Coolant Coolant - - - Drain Coolant Drain Drain and and and Refill
3. Remove front subframe.
Subframe Subframe - - - Front Subframe Front Front
4. Remove alternator.
Alternator
Alternator Alternator
5. Remove starter motor
Starter motor motor
Starter Starter motor
6. Remove air cleaner assembly.
Air Cleaner(s) Air Air Cleaner(s) Cleaner(s)
7. Remove ECM.
Engine Engine Engine Control Control Module Control Module (ECM) Module
8. Remove battery carrier bracket.
Battery carrier carrier bracket bracket . . .
Battery Battery carrier bracket
9. Release clips securing battery lead and harness
connector blocks to battery carrier.
10. Remove 4 bolts securing battery carrier and remove
bracket.
11. Release 2 harness clips from battery carrier support
Version 2.0
Refill Refill
(ECM) . . . (ECM)
Engine Mechanical-1.8 VCT
bracket and remove bracket.
12. Disconnect vacuum pipe from throttle body and
position aside.
Caution: Always fit plugs to open connections to prevent
contamination.
13. Remove 3 bolts securing air conditioning compressor
to mounting bracket and position air conditioning
compressor aside.
14. Release clips and disconnect gear selector cables from
transmission bracket.
15. Noting fitted positions, carefully disconnect both gear
selector cable ball joints.
196