Oil Seal-Oil Pump - MG MG6 Series 2011 Service Manual

Transmission
Oil Seal–Oil Pump
Remove
1. Remove torque converter.
Torque Converter–Remove Converter–Remove
Torque Torque Converter–Remove
2. Use tool to remove the oil seal from the oil pump.
Caution: Be careful not to damage the bushing on the oil
pump body.
Caution: Be careful not to damage the input shaft.
Refit
1. Use T26005and a hammer to fit the new oil seal on
oil pump.
Caution: Be careful not to damage the oil seal.
Caution: Be careful not to damage the input shaft.
2. Ensure oil seal is 0±0.15 from the end of the oil pump
body.
3. Smear the oil seal lip with grease.
4. Fit the torque convertor.
Torque Converter–Refit Converter–Refit
Torque Torque Converter–Refit
Version 2.0
Transmission-AT
398