MG MG6 Series 2011 Service Manual page 468

HVAC System
Filter Filter Housing Filter Housing Housing
1. Filter housing cover
2. Pollen filter
The filter housing is located in the passenger side of the plenum
and secured to the bulkhead by two bolts. A pollen filter is
installed in the housing to improve the quality of the fresh air
supply to the vehicle interior.
Fresh air from the filter housing, or recirculated air, flows into
the heater assembly where a variable speed blower, and/or ram
Version 2.0
3. Filter housing
4. Bolt
effect, forces the air through the system. Depending on the
settings on the control panel, the air is then heated or cooled
as required and supplied through the distribution ducts to the
windscreen, fascia and floor level outlets. A thumbwheel on
the fascia allows the flow of the front face level outlets to be
adjusted independently from the settings on the control panel.
HVAC Structure
452