Service Procedures; Seat Complete - Passenger - MG MG6 Series 2011 Service Manual

Seats

Service Procedures

Seat Complete - Passenger

Remove
1. Disconnect battery earth lead.
2. Move seat fully back.
3. Remove 2 covers from front fixings.
4. Remove 2 bolts securing front of seat to body and
discard bolts.
5. Move seat fully forward.
6. Remove 2 bolts securing rear of seat to body and
discard bolts.
7. Disconnect seat belt and side airbag multiplugs (if
fitted).
8. Remove seat from vehicle.
Refit
1. Making sure the seat slides are correctly aligned,
position front seat to vehicle.
2. Connect seat belt and side airbag multiplugs (if fitted).
3. Fit 2 new bolts securing rear of seat to body and tighten
to 40-50Nm.
4. Move seat fully back.
5. Fit 2 new bolts securing front of seat to body and
tighten to 40-50Nm.
Version 2.0
6. Fit covers to front fixings.
7. Connect battery earth lead.
Interior Fitting
671