Power Controller - MG MG6 Series 2011 Service Manual

HVAC Structure

Power Controller

Remove
1. Remove fascia.
Fascia remove remove
Fascia Fascia remove
2. Disconnect power controller connector.
3. Remove 2 bolts securing power controller to heater
case.
4. Remove power controller.
Refit
1. Fit power controller to heater case and tighten bolts
to 9 Nm
2. Reconnect power controller connector.
3. Fit fascia.
Fascia refit Fascia Fascia refit refit
Version 2.0
HVAC System
485