Engine Oil Pressure Check - MG MG6 Series 2011 Service Manual

Engine Mechanical-1.8T
correct level.
Capacities
Capacities Capacities
Fluids Fluids and Fluids and and Lubricants Lubricants Lubricants
7. Fit oil filler cap.
8. Fit underbelly panel.
Undertray Undertray - - - Assembly Undertray Assembly Assembly
9. Lower vehicle.
10. Start and run engine until oil pressure warning light
extinguishes.
11. Stop engine. Re-check engine oil level.
12. Check for signs of leakage.
Version 2.0

Engine Oil Pressure Check

Check
1. Remove oil pressure switch.
Switch - - - Oil Oil Pressure Pressure . . .
Switch Switch Oil Pressure
2. Fit sealing washer from oil pressure switch to oil
pressure gauge adaptor.
3. Fit and tighten oil pressure gauge adaptor to oil pump
housing.
4. Connect oil pressure gaugeT10001 to adaptor and
tighten union.
5. Check and if necessary, top-up engine oil.
6. Start and run engine until normal operating temperature
is reached.
7. Note oil pressure readings with the engine running at
idle and at 3500 rev/min (Refer to specification).
8. Switch off engine, unscrew gauge union and remove
gauge.
9. Remove adaptor.
10. Wipe off oil spillage.
11. Fit oil pressure switch.
Switch Switch - - - Oil Switch Oil Pressure Oil Pressure Pressure
Engine
91