Wipers And Washers; Windscreen Wiper Operation - MG ZS Manual

INSTRUMENTS AND CONTROLS

Wipers and Washers

Windscreen Wiper Operation

The wipers and washers will only operate with the ignition
switch in the ACC or ON position. Operate the lever to
select different wipe speeds:
• Intermittent wipe (1)
• Slow wipe (2)
38
• Fast wipe (3)
• Single wipe (4)
• Intermittent wipe frequency adjustment (5)
• Programmed wash/wipe (6)
Intermittent Wipe
By pushing the lever up to the Intermittent wipe position
(1), the wipers will operate automatically. Turn the switch
*
(5) to adjust the intermittent wipe frequency. This speed
will also change with the vehicle speed. As the vehicle
speed increases, the wiper frequency increases. As the
vehicle speed decreases, the wiper frequency decreases.
Slow Wipe
By pushing the lever up to the slow wipe position (2), the
wipers will operate slowly. Move the lever to re-select the
wipe speed.
Fast Wipe
By pushing the lever up to the fast wipe position (3), the
wipers will operate fast. Move the lever to re-select the
wipe speed.
*