Wipers And Washers; Front Windscreen Wiper And Washer Operation - MG MG4 Owner's Handbook Manual

Wipers and Washers

Front Windscreen Wiper and Washer
Operation
When the vehicle is powered on, operate the lever switch
to select different wiping modes.
• HI: Fast Speed Wipe
• LO: Slow Speed Wipe
• INT: Automatic Wipe
• OFF: Wiper Off (Default position)
INSTRUMENTS AND CONTROLS
• 1x: Single Wipe
Automatic Wipe
By pushing the lever switch up to the automatic wipe
position ( INT position as shown), the wipers will operate
automatically.
Move the automatic wipe speed adjustment switch ( 1 as
shown) to adjust the automatic wipe speed.This speed
also changes with the vehicle speed. As the vehicle speed
increases, the wipe interval becomes shorter.
vehicle speed decreases, the wipe interval becomes longer.
Slow Speed Wipe
By pushing the lever switch up to the slow speed wipe
position ( LO position as shown), the wipers will operate
at slow speed.
Fast Speed Wipe
By pushing the lever switch up to the fast speed wipe
position ( HI position as shown), the wipers will operate at
fast speed.
2
As the
57