6.2.3 Assembling of absorber canister
On the anaesthesia unit it is possible to use a multipurpose
rechargeable absorber canister or a disposable pre-loaded absorber
canister.
It is recommended to use only original SIARE spare parts or spare parts
checked and approved by SIARE.
The absorber canister is positioned in the upper side of valves group. The apposite
lock (unlock) lever makes very easy to hook (unhook) the canister.
Mount the CO 2 absorber canister on the anaesthesia unit as shown in the picture.
•
To unpack carefully the CO2 absorber
canister.
•
Shake the absorber canister
(disposable model) in order to separate
the soda lime granules.
•
Remove the seal from absorber
canister (disposable model).
•
Insert the absorber canister in the
apposite groove (opposite side of the
"PUSH" lever)
•
Press the apposite lock "PUSH" lever
(unlock).
•
Press down and release the apposite
lock lever (unlock).
•
Push (lever side) down the absorber
canister
•
Release the lock "PUSH" lever (unlock)
User's Manual, DU3310103-MRI / rev.3 - 02.05.2019
Preparation to use
6-7