Table of Contents
Advertisement
Maintenance
Patient
circuit
(silicone
hoses)
Couplings
and
connectors
10-8
Dismantle and clean, then sterilize in an
autoclave, disinfect with steam or
chemically.
The patient circuit can be sterilized by means of steam
but this can lead to early wear of the tubes. Yellowing
and reduced flexibility are side effects caused by
sterilization using steam.
Do not clean or re-use disposable circuit tubes.
Do not clean or re-use if the filters are the disposable
type.
WARNING! Risk of injury for the patient
It is necessary to have at least one spare patient circuit
in stock for routine use and /or accidental breaks.
Dismantle and clean, then sterilize in an
autoclave, disinfect with steam or
chemically.
Before using again,
eliminate any humidity
inside the tubes by
means of compressed
air.
Check that there are no
splits in the tubes and
replace them if they are
damaged.
Before using again,
eliminate any humidity
inside the components
by means of
compressed air.
Check that there are no
splits and replace them
if they are damaged.
MORPHEUS MRI
Advertisement
Table of Contents
