Table of Contents
Advertisement
1.4
Correct operation
For correct and complete functioning, the MORPHEUS LT/MRI anaesthesia unit must
be:
•
connected to the air and oxygen outlets of the medical gas distribution system or
of the cylinders; the compressed air can also be supplied by a medical air
compressor (optional);
•
correctly connected to the patient circuit;
•
connected to a mains power supply with the same voltage as specified on the
identification plate;
•
correctly connected to all accessories and equipment necessary for the
operation.
For its employ the MORPHEUS LT/MRI anaesthesia unit has been designed and
made to guarantee full quality of the product and its components, in order to ensure
the maximum reliability of the unit for the patient and user safety.
This user's manual explains how to use the MORPHEUS LT/MRI anaesthesia unit
and how to carry out simple maintenance.
To ensure the best performance of the MORPHEUS LT/MRI anaesthesia unit periodic
maintenance of the ventilator by qualified technical personnel is recommended. For
further information, contact SIARE ENGINEERING INTERNATIONAL GROUP s.r.l.
SIARE ENGINEERING INTERNATIONAL GROUP s.r.l. recommends careful reading
of this manual and the relative labels before operating the ventilator or carrying out
any maintenance.
User's Manual, DU3310103-MRI / rev. 3 - 02.05.2019
The connections with main power supply, as well as connections
with medical gas distribution system must be effected according to
the indications contained in the present user's manual.
Introduction
1-5
Advertisement
Table of Contents
