How setting and/or modify the Vt parameter (Vte alarm)
User's Manual, DU3310103-MRI / rev.3 - 02.05.2019
Keep pressed for at least 5 seconds the key aside
the Vt parameter
The display shows the DEFAULT parameter referred
to the Vte alarm (
The DEFAULT parameter (
Turn clock-wise (counter-clockwise) to increase (decrease) the
value of the alarm parameter [ Vte ]
The DEFAULT parameter
Press the knob to confirm the value
value of parameter Vt
The
L 50
) or a value previously set
L 50
L 20
flashes
(
)
L 20
DOES NOT flash
(
)
Alarms: AD.A module
) flashes
8-13