[Class 4] I/F Monitor Setting - Panasonic MINAS A6 Series Operating Instructions Manual

1. Details of parameter

[Class 4] I/F monitor setting

Pr4.01 *
SI2 input selection
Pr4.02 *
SI3 input selection
Pr4.03 *
SI4 input selection
Pr4.04 *
SI5 input selection
Pr4.05 *
SI6 input selection
Pr4.06 *
SI7 input selection
Caution Deviation counter clear (CL) can be set up only with this parameter. If any other parameter
is used for this purpose, Err33.6 Counter clear assignment error will be issued.
Pr4.07 *
SI8 input selection
Pr4.08 *
SI9 input selection
Pr4.09 *
SI10 input selection
Assign functions to SI2 to SI10 inputs.
These parameters are presented in hexadecimals.
Setup procedure is the same as described for Pr4.00.
Note
For input pin assignment with default setting, also refer to P.3-39 Control input.
Caution
Command pulse inhibition input (INH) can be setup only with this parameter. If any other
parameter is used for this purpose, Err33.7 INH assignment error will be issued.
Note
• A parameter is designated as follows:
• For parameters which No. have a suffix of " * ", changed contents will be validated when
you turn on the control power.
Related page
• P.3-32... "Inputs and outputs on connector X4" • P.6-2 "Protective Function"
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
4-40
Range
0 to 00FFFFFFh
Range
0 to 00FFFFFFh
Range
0 to 00FFFFFFh
Range
0 to 00FFFFFFh
Range
0 to 00FFFFFFh
Range
0 to 00FFFFFFh
Range
0 to 00FFFFFFh
Range
0 to 00FFFFFFh
Range
0 to 00FFFFFFh
Pr0.00 Parameter No.
Class
Related
Unit Default
control mode
00818181h
— P S T F
(8487297)
Related
Unit Default
control mode
0091910Ah
— P S T F
(9539850)
Related
Unit Default
control mode
00060606h
— P S T F
(394758)
Related
Unit Default
control mode
0000100Ch
— P S T F
(4108)
Related
Unit Default
control mode
00030303h
— P S T F
(197379)
Related
Unit Default
control mode
00000f07h
— P S T F
(3847)
Related
Unit Default
control mode
00040404h
— P S T F
(263172)
Related
Unit Default
control mode
00050505h
— P S T F
(328965)
Related
Unit Default
control mode
00000E88h
— P S T F
(3720)