7-7 CS signal connector
Name
CS signal power supply output
-
CS signal input
Frame ground
Note 1) The E5V of the is connected with the terminal No. 1 of the connector
The power supply that can be supplied from E5V and EX5V of X5 is 5 V ± 5% 300 mA MAX.
Note 2) The E0V of the CS signal power output ground is connected with the terminal No. 2 of the connector
(EX0V) and control circuit ground of the connector
7-8 Analog monitor connector
Name
Analog monitor output 1
Analog monitor output 2
Signal ground
Reserved
R2.0
X6
Symbol
pin No.
E5V
E0V
-
CS3
CS2
CS1
FG
X7
Symbol Pin No.
• Analog signal output for monitoring.
AM1
1
• The meaning of the output signal varies depending on the
AM2
2
parameter setting.
• Signal ground
GND
3
• Do not connect anything to this connector.
-
4,5
1
CS signal power supply output (Note1)
2
CS signal power output ground (Note 2)
3
Do not connect anything to this connector.
4
CS signal3 input
5
CS signal2 input
6
CS signal1 input
shell
Internally connected to the earth terminal.
X4 .
Description
Industrial Device Solution Business Unit, Panasonic Corporation
No. SX-DSV03335 - 46-
Description
X5 (EX5V).
Input / output
signal interface
X5
Ao-1
-
-