Table of Contents
Advertisement
6.11. Test
Menu
6.11.1. Code Scanning Test
Tap the 1: SCANNER bu
displayed. Then scan a
shown on the screen.
When a code is scanned, the LED indicator illuminates in blue, and the beeper sounds once.
The scan
ned code type, number of digits and scanned data are displayed in the screen.
The code type and numb
Code Mark TYPE1 ( Co
The scanned codes are disp
The characters displayed on the screen var
The Test menu is used to perform the following hardware tests for the
BHT. To open the Test menu, t
1:SCANNER:
2: BEEPER:
3: AGI
NG:
4
: COM:
5
: DISPLAY:
6
: KEY VIBRATION: Performs a key entry and vibrator test.
Note Contact your sales dealer if an error occurs during the above
tton in the T
est menu to perform a code scanning test.
n actual code
with the BHT, and confirm that the scanne
Code M
ark (TYPE1)
Code Mark (TYPE2)
Number of digits
Scanned data
BHT-1300B
er of digits a
re displayed in the order shown below.
) number of digits
de Mark TYPE2
layed as characters.
y depending on the code types as shown in the Code mark list.
ap "4:Test" in the System Menu.
Performs a barcode scanning test.
Performs a b
Performs an ag
Performs a communication test.
Performs an LCD and indicator LED test.
tests.
Code Mark (TYPE1)
Code Mark (TYPE2)
Number of digits
Scanned data
BHT-1300Q
- 124 -
eeper scale test.
ing test.
The screen shown below is
d data matches with the data
Read Parameter button:
Opens the scanner
reading parameter
menu. (refer to "6.10.
Scanner Reading
Parameters".)
Advertisement
Table of Contents
