INTRODUCTION
2.1
This section introduces the features, functions and specifications for RS232, USB,
Ethernet and IEEE 488.2 GPIB. Programmable, readback functions and specifications
are applicable to all the communication interfaces.
FEATURES OF RS232 INTERFACE
2.2
•
Programming and readback of voltage and current
•
Programmable overvoltage protection with reset
•
SCPI compliant command set
•
User selectable Constant-Voltage(CV), Constant-Current(CC), Constant
Power (CP) or Foldback mode(CV/CC/CP), with reset
•
Voltage Ramp and Current Ramp functions
•
Soft calibration
•
Rear panel RS232 control interface
•
Rear panel Remote Analog Programming and External user control interface
(Common to all interfaces)
FEATURES OF USB INTERFACE
2.3
•
Programming and readback of voltage and current
•
Programmable overvoltage protection with reset
•
SCPI compliant command set
•
User selectable Constant-Voltage(CV), Constant-Current(CC), Constant
Power (CP) or Foldback mode(CV/CC/CP), with reset
•
Voltage Ramp and Current Ramp functions
•
Soft calibration
•
Rear panel USB control interface
M330461-01 Rev A
FEATURES, FUNCTIONS
AND SPECIFICATIONS
2
2-1