Ametek ASTDC60D1C-E00 Programming Manual page 38

Ethernet Configuration and Remote Programming
5. Select the Terminal from the Tera Term. (Refer to Figure 5- 5)
6. Change the settings. (Refer to Figure 5- 6)
7. Test the communication interface by issuing the *IDN? Command. This returns
the supply's model and serial numbers, and software version(s). This
command does not affect the output of the supply.
5-4
Figure 5- 5 Terminal selection in Tera Term
Figure 5- 6 Terminal setup in Tera Term
Asterion DC Series Programming
M330461-01 Rev A