System Scpi Command Reference - Ametek ASTDC60D1C-E00 Programming Manual

Asterion DC Series Programming
:TERM <NRf>
:TERM?

SYSTEM SCPI Command Reference

9.8.2
The letter "C" in the "SCPI" column means that the command syntax is SCPI compliant;
an "N" in the "SCPI" column means that the command syntax is not part of the SCPI
definition.
Command
SYSTem:ERRor?
SYSTem:LOCAL <boolean>
SYSTem:LOCAL?
SYST:NET:AUTOIP <boolean>
SYST:NET:AUTOIP?
SYST:NET:DESC <string>
SYST:NET:DESC?
SYST:NET:DHCPMODE <boolean> Sets the network DHCP Mode in the Primary configuration
SYST:NET:DHCPMODE?
SYST:NET:DNS <string>
SYST:NET:DNS?
SYST:NET:GATE <string>
SYST:NET:GATE?
SYST:NET:HOST <string>
SYST:NET:HOST?
SYST:NET:IP <string>
M330461-01 Rev A
External User Control Signal Connector
Queries Error Queue for next error/event entry (first in, first out).
Entries contain an error number and descriptive text. A 0 return
value indicates no error occurred; negative numbers are
reserved by SCPI. The maximum return string length is 255
characters. The queue holds up to 10 error/entries. All entries
are cleared by the *CLS command.
Forces the supply to local or remote state.
<ON> or <1> sets operation to local mode.
<OFF> or <0> sets the operation to remote mode.
Returns ON or 1 if in local mode.
Returns OFF or 0 if in remote mode.
Sets the network Auto IP mode in the Primary configuration
without affecting the Secondary configuration..
0 = disable AutoIP; 1 = enable AutoIP
Returns 1 if AutoIP is enabled in the Primary configuration.
Returns 0 if AutoIP is disabled in the Primary configuration.
Set the network Description, a 36 character alphanumeric string
Returns the network Description.
without affecting the Secondary configuration.
0 = disable DHCP; 1 = enable DHCP
Returns 1 if DHCP Mode is enabled in the Primary
configuration.
Returns 0 if DHCP mode is disabled in the Primary
configuration.
Sets the network DNS IP address for the device. String is in the
format "NNN.NNN.NNN.NNN"
where "NNN" = 0 through 255, inclusive.
Returns the network DNS address for the device.
Sets the network gateway IP address for the device. String is in
the format "NNN.NNN.NNN.NNN" where "NNN" = 0 through
255, inclusive.
Returns the network gateway IP address for the device.
Set the network Host Name, a 15-character (maximum)
alphanumeric string.
(Must be limited to 15 characters for LXI compliance)
Returns the network Host Name
Sets the Primary configuration to STATICIP mode and sets the
network IP address for the device.
String is in the format "NNN.NNN.NNN.NNN"
where "NNN" = 0 through 255, inclusive.
Description SCPI
C
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
9-25