Features Of Ethernet Interface; Features Of Ieee 488.2 Gpib Interface; Programmable Functions - Ametek ASTDC60D1C-E00 Programming Manual

Features, Functions and Specifications
•
Rear panel Remote Analog Programming and External user control interface
(Common to all interfaces)

FEATURES OF ETHERNET INTERFACE

2.4
•
Ethernet/LAN connectivity, 10/100base-T compatible
•
Fully
•
Built-in Web Server for direct control using Web Browser
•
Programming and readback of voltage and current
•
Programmable overvoltage protection with reset
•
SCPI compliant command set
•
User selectable Constant-Voltage(CV), Constant-Current(CC), Constant
Power (CP) or Foldback mode(CV/CC/CP), with reset
•
Voltage Ramp and Current Ramp functions
•
Field-upgradable firmware via Ethernet
•
Full calibration through software control
•
Rear panel Ethernet control interface
•
Rear panel Remote Analog Programming and External user control interface
(Common to all interfaces)

FEATURES OF IEEE 488.2 GPIB INTERFACE

2.5
•
Programming and readback of voltage and current
•
Programmable overvoltage protection with reset
•
IEEE 488.2 and SCPI compliant command set
•
User selectable Constant-Voltage(CV), Constant-Current(CC), Constant
Power (CP) or Foldback mode(CV/CC/CP), with reset
•
Voltage Ramp and Current Ramp functions
•
Soft calibration
•
Rear panel GPIB IEEE 488.2 control interface
•
Rear panel Remote Analog Programming and External user control interface
(Common to all interfaces)

PROGRAMMABLE FUNCTIONS

2.6
The below functions are common to all communication interfaces (RS232, USB, IEEE
488.2 GPIB and Ethernet).
•
Output voltage and current
•
User limits for voltage and current
•
Overvoltage protection
•
Output enable/disable
2-2
™ (LAN eXtensions for Instrumentation) class C compliant
Asterion DC Series Programming
M330461-01 Rev A