System Scpi Command Subsystem; System Scpi Command Summary - Ametek ASTDC60D1C-E00 Programming Manual

SCPI Status Implementation
Command
OUTPutAUX:5V <ON|OFF>
OUTPutAUX:5V?
OUTPutAUX:5V <ON|OFF>15V <ON|OFF>
OUTPutAUX:15V?
OUTPut:ISOLation <Boolean>
OUTPut:ISOLation?
OUTPut:POLarity<NORM/0/OFF|INV/1/O>
OUTPut:POLarity?

SYSTEM SCPI COMMAND SUBSYSTEM

9.8
This section first presents a tree summary of the SYSTem commands and then
provides a tabular description.

SYSTEM SCPI Command Summary

9.8.1
SYSTem
:ERRor?
:LOCAL <boolean>
:LOCAL?
:NET
:AUTOIP <boolean>
:AUTOIP?
:DESC <string>
:DESC?
:DHCPMODE <boolean>
:DHCPMODE?
:DNS <string>
:DNS?
:GATE <string>
:GATE?
:HOST <string>
:HOST?
:IP <string>
:IP?
:LANLED <boolean>
:LANLED?
:MAC?
:MASK <string>
:MASK?
:NETBUTTON <string>
:PORT <NRf>
:PORT?
9-24
Description
Turns ON or OFF, 5V auxiliary supply at the Remote
Analog Programming connector
Returns the status of 5V auxiliary supply at the
Remote Analog Programming connector
Turns ON or OFF, 15V auxiliary supply at the
Remote Analog Programming connector
Returns the status of 15V auxiliary supply at the
Remote Analog Programming connector
Sets the rear panel isolation relay control signal ON
or OFF. Valid arguments are 1/ON or 0/OFF.
Returns the state of the rear panel isolation relay
control signal: 1 = ON 0 = OFF
Changes the state of the polarity relay signal. This
command requires that the isolation relay be open
beforehand
Returns the state of the polarity relay: <NORM|INV>
Asterion DC Series Programming
M330461-01 Rev A
SCPI
N
N
N
N
N
N
C
C