Calibration Scpi Command Reference - Ametek ASTDC60D1C-E00 Programming Manual

Asterion DC Series Programming
CALibrate
:OUTPut
:POWer
:OVERVOLT
:UNLock <string>
:STORe
:LOCK

CALIBRATION SCPI Command Reference

9.11.2
The letter "C" in the "SCPI" column means that the command syntax is SCPI compliant;
an "N" in the "SCPI" column means that the command syntax is not part of the SCPI
definition.
Command
CALibrate
:INITial
CALibrate
:INITial:CURRent <NRf>
CALibrate
:INITial:CURRent?
ALibrate
C :INITial:CURRent:LIMit <NRf>
CALibrate
:INITial:CURRent:LIMit?
CALibrate
:INITial:CURRent:PROGram
<string>
CALibrate
:INITial:CURRent:PROGram:FSC
<NRf>
CALibrate
:INITial:CURRent:PROGram:FSC?
CALibrate
:INITial:CURRent:PROGram:FSCR
<NRf>
M330461-01 Rev A
:EXTV
:OFFSET <NRf>
:FSC <NRf>
:EXTI
:OFFSET <NRf>
:FSC <NRf>
:EXT420MA
:OFFSET <NRf>
:FSC <NRf>
:MON
:OFSET <NRf>
:FSC <NRf>
:EXTV
:OFFSET <NRf>
:FSC <NRf>
External User Control Signal Connector
Description
This command subsection is used to
store next power up values or
Initialize calibration in specified
cases
Sets the power-on default value of
current.
Returns the default value of power-
on current.
Sets the power-on default value of
current limit.
Returns the default value of power-
on current limit.
Sets the power-on default setting for
output current programming. Valid
arguments - INT, EXT or ADD
Sets the power-on default voltage
value for full scale current from
external analog programming.
Returns the power-on default full
scale voltage value.
Sets the power-on default resistance
value for full scale current from
external analog programming.
SCPI
N
N
N
N
N
N
N
N
N
9-31