Ametek ASTDC60D1C-E00 Programming Manual page 117

Asterion DC Series Programming
Command
CALibrate
:MODel:POWERON <string>
CALibrate
:MODel:POWERON?
CALibrate
:MODel:RESET <string>
CALibrate
:MODel:RESET?
CALibrate
:OUTPut
CALibrate
:OUTPut:CURRent
CALibrate
:OUTPut:CURRent:CALCulate
CALibrate
:OUTPut:CURRent:DAC <NR1>
CALibrate
:OUTPut:CURRent:FIVEPOINT
<1|2|3|4|5> <NRf>
CALibrate
:OUTPut:CURRent:FIVEPOINT?
CALibrate
:OUTPut:CURRent:GAIN <NRf>
CALibrate
:OUTPut:CURRent:GAIN?
CALibrate
:OUTPut:CURRent:OFFSet <NRf>
CALibrate
:OUTPut:CURRent:OFFSet?
CALibrate
:OUTPut:CURRent:EXTV:OFFSET
<NRf>
CALibrate :OUTPut:CURRent:EXTV:FSC <NRf> Sets the calibration full-scale point
CALibrate
:OUTPut:CURRent:EXTI:OFFSET
<NRf>
CALibrate :OUTPut:CURRent:EXTI:FSC <NRf> Sets the calibration full-scale point
M330461-01 Rev A
External User Control Signal Connector
Description
Sets the default output enable
condition at power on.
Input format:
"ON,INIT" enables the output at next
power on
"OFF,INIT" disables the output at
next power on
NOTE: Quotation marks are
required in the command string.
Returns the status of the output
enable condition at power on
Sets the default output enable
condition when the *RST command
is issued.
Input format:
"ON,INIT" enables the default output
"OFF,INIT" disables the default
output
NOTE: Quotation marks are
required in the command string.
Returns the status of the default
output enable condition when the
*RST command is issued
Calibrate Output subsystem
Calibrate Output Current subsystem
Calculates the value of the gain and
offset for output current.
Sets the output of the output current
D/A converter.
Sets output current value for each
calibration point (1-5)
Returns the entered values for 5-
point calibration.
Sets the value of the gain for the
output current.
Returns the value of the gain for the
output current.
Sets the value of the offset for the
output current.
Returns the value of the offset for
the output current.
Sets the calibration Offset point for
current programming from external
voltage source
for current programming from
external voltage source
Sets the calibration Offset point for
current programming from external
resistance source
for current programming from
external resistance source
SCPI
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
9-35