Rs232 Setup Procedure; Table 4-3. Rs-232C Interface Connector Pinout - Ametek ASTDC60D1C-E00 Programming Manual

Series Programming
Asterion DC

RS232 Setup Procedure

4.2.2
This section provides a quick reference for the configuration requirements for RS232.
Parameter
Baud Rate
Data Bits
Stop Bits
Parity
Incoming
Termination
Character
Outgoing
Termination
Character(s)
1. Build an RS232 communications cable as per the pinout description illustrated
in Figure 4-3 (with crossover of signals Rx/Tx and CTS/RTS):
M330461-01 Rev A
Setting
Selectable from 9600 to 115200
8
1
None
• CR (Carriage Return): HEX, 0x0d (DEC, 13),
• LF (Line Feed): HEX, 0x0a (DEC, 10),
• CR LF (Carriage Return and Line Feed):
HEX, 0x0d 0x0a (DEC, 13 10)
• LF CR (Line Feed and Carriage Return):
HEX, 0x0a 0x0d (DEC, 10 13)
CR LF (Carriage Return and Line Feed):
HEX, 0x0d 0x0a (DEC, 13 10)
D-Subminiature 9-Pin
Connector
Male Connector
(Power supply
Interface)
2(RxD)
3(TxD)
No Connection
5(GND)
7(RTS)
8(CTS)
Table 4–3. RS-232C Interface Connector Pinout
RS232 Configuration and Remote Programming
D-Subminiature 9-Pin
Connector
Female Socket (PC
interface)
3(TxD)
2(RxD)
No Connection
5(GND)
8(CTS)
7(RTS)
Notes
The baud rate is
selectable through the
front panel
Not Selectable
Not Selectable
Not Selectable
4-3