Output Scpi Command Subsystem; Output Scpi Command Summary - Ametek ASTDC60D1C-E00 Programming Manual

SCPI Status Implementation
Command
MEASure:VOLTage:AVErage?
MEASure:VOLTage:PROGram?
MEASure:VOLTage:PROTection
:PROGram?

OUTPUT SCPI COMMAND SUBSYSTEM

9.7
This section first presents a tree summary of the OUTPut commands and then
provides a tabular description.

OUTPUT SCPI Command Summary

9.7.1
OUTPut
:PROTection
:DELay <NRf>
:DELay?
:FOLD <0|1|2>
:FOLD?
:SENSe <boolean>
:SENSe?
:DEFault <Boolean>
:DEFault?
:STATe <boolean>
:STATe?
:TRIPped?
:AUX
:5V <ON|OFF>
:5V?
:15V <ON|OFF>
:15V?
:ISOLation <Boolean>
:ISOLation?
:POLarity <string>
:POLarity?
9-22
Description
default) provides the fastest response time in the
readings, but less rejection of noise.
Returns the number 1 to 5 to indicate the last set
number of readings to average together when taking a
voltage reading.
Returns the programmed output voltage from external
Analog voltage programming feature.
Returns the programmed Over voltage trip point from
external Analog over voltage programming feature.
Asterion DC Series Programming
M330461-01 Rev A
SCP
I
N