Figure 4-5. Port Setting In Tera Term; Figure 4-6. Baud Rate Setting In Tera Term - Ametek ASTDC60D1C-E00 Programming Manual

Series Programming
Asterion DC
5. Use one of the available programs for serial communication, such as Tera Term.
If you choose to use Tera Term:
6. Select serial option in the Tera term window and select the port as COM1 and
press OK. (Refer to Figure 4-5)
7. Select setup and select serial port in the setup window.
8. Set the baud rate to 9600, 8 data bits, no parity, 1 stop bit, and no flow control.
(Refer to Figure 4-6)
M330461-01 Rev A
RS232 Configuration and Remote Programming

Figure 4-5. Port Setting in Tera Term

Figure 4-6. Baud rate Setting in Tera Term

4-5