Calibration Scpi Command Subsystem; Calibration Scpi Command Summary - Ametek ASTDC60D1C-E00 Programming Manual

SCPI Status Implementation

CALIBRATION SCPI COMMAND SUBSYSTEM

9.11
Note: See section 10 for calibration procedures.
Please refer to the power supply manual for further information before performing
calibration procedures. Calibration must be performed by qualified personnel who
appropriately deal with attendant hazards. If calibration is not performed properly,
functional problems could arise, requiring that the supply be returned to the
CAUTION
factory.

CALIBRATION SCPI Command Summary

9.11.1
CALibrate
:INITial
:CURRent <NRf>
:CURRent?
:VOLTage <NRf>
:VOLTage?
9-28
:LIMit <NRf>
:LIMit?
:PROGram <string>
:PROGram?
:FSC <NRf>
:FSC?
:FSCR <NRf>
:FSCR?
:MONitor
:FSC <NRf>
:FSC?
[:AMPLitude] <NRf>
[:AMPLitude?]
:PROTection <NRf>
:PROTection?
:LIMit <NRf>
:LIMit?
:PROGram <string>
:PROGram?
:SOURce <string>
:SOURce?
:FSC <NRf>
:FSC?
:FSCR <NRf>
:FSCR?
:MONitor
:FSC <NRf>
:FSC?
Asterion DC Series Programming
M330461-01 Rev A