System Commands - Kramer VS-3232DN-EM User Manual

SN
Functions
Set -
SN?
Get
Description
Set -
Get
Get device serial number
Response
~nn@SNSPserial_numberCR LF
Parameters
serial_number – 11 decimal digits, factory assigned
Response Trigger
Notes
For new products with 14 digit serial numbers, use only the last 11 digits
K-Config Example
"#sn?",0x0D
VERSION
Functions
Set -
VERSION?
Get
Description
Set -
Get
Get firmware version number
Response
~nn@VERSIONSPfirmware_versionCR LF
Parameters
firmware_version – XX.XX.XXXX where the digit groups are: major.minor.build version
Response Trigger
Notes
K-Config Example
"#VERSION?",0x0D

System Commands

Command
CPEDID
GEDID
GEDID-EXT
HDCP-MOD
HDCP-STAT
LDEDID
LOCK-FP
MODULE-INFO
MODULE-TYPE
MODULE-VER
VS-3232DN-EM – Protocol 3000
Permission
-
End User
Syntax
-
#SN?CR
Description
Copy EDID data from the output to the input EEPROM
Read EDID data
Read EDID data from external device connected to output
Set/Get HDCP mode
Get HDCP signal status
Load EDID data
Lock front panel
Get module information
Set/Get module type, slot location, and status
Read module firmware version
Transparency
-
Public
Permission Transparency
- -
End User Public
Syntax
-
#VERSION?CR
Kramer Electronics Ltd.
102