Kramer VS-3232DN-EM User Manual page 122

AUD-LVL
Functions
AUD-LVL
Set
AUD-LVL?
Get
Description
Set audio level in specific amplifier stage
Set
Get Get audio level in specific amplifier stage
Response
~nn@AUD-LVLSPstage,channel,volumeCR LF
Parameters
stage – 1/IN (input), 2/OUT (output)
channel – input or output number: 1-32 (varies according to installed input / output cards, see
Numbering on page 14)
volume – audio level in Kramer units: 0-70, ++ (increase current value), -- (decrease current value)
Response Trigger
Notes
The VOLUME command can also be used to set simple output audio volume.
A minus sign precedes negative values.
K-Config Example
Set the audio level of output 8 to 30:
"#AUD-LVL 2,8,30",0x0D
Increase the audio level of input 3 by 1 unit:
"#AUD-LVL 1,3,++",0x0D
BALANCE
Functions
BALANCE
Set
BALANCE?
Get
Description
Set Set the balance level
Get
Get the current balance level
Response
~nn@BALANCESPout_channel,balance_levelCR LF
Parameters
out_channel – output number: 1-32 (varies according to installed output cards, see
Numbering on page 14)
balance_level – balance level in Kramer units: 0-100, ++ (increase current value), -- (decrease
current value)
Response Trigger
Notes
A minus sign precedes negative values
K-Config Example
Set the balance level of output 5 to 50:
"#BALANCE 5,50",0x0D
Increase the balance level of output 5 by 1 unit:
"#BALANCE 5,++",0x0D
VS-3232DN-EM – Protocol 3000
Permission
End User
End User
Syntax
#AUD-LVLSPstage,channel,volumeCR
#AUD-LVL?SPstage,channelCR
Permission
End User
End User
Syntax
#BALANCESPout_channel,balance_levelCR
#BALANCE?SPout_channelCR
Kramer Electronics Ltd.
Transparency
Public
Public
Port
Transparency
Public
Public
Port
119