Kramer VS-3232DN-EM User Manual page 121

H-PHASE
Functions
H-PHASE
Set
H-PHASE?
Get
Description
Set H-Phase value
Set
Get Get H-Phase value
Response
~nn@H-PHASESPstage,channel,valueCR LF
Parameters
stage – 1/IN (input), 2/OUT (output)
channel – input or output number: 1-32 (varies according to installed input / output cards, see
Numbering on page 14)
value – H-Phase value in Kramer units: 0-63, ++ (increase current value), -- (decrease current value)
Response Trigger
Notes
A minus sign precedes negative values
This command is only valid for VGA cards
K-Config Example
Set the H-Phase value of output 8 to 60:
"#H-PHASE 2,8,60",0x0D
Increase the H-Phase value of input 5 by 1 unit:
"#H-PHASE 1,5,++",0x0D
Audio Commands
VS-3232DN-EM – Protocol 3000
Permission
End User
End User
Syntax
#H-PHASESPstage,channel,valueCR
#H-PHASE?SPstage,channelCR
Command Description
AUD-LVL
Set/get audio level in specific amplifier stage
BALANCE
Set/get balance level
BASS
Set/get audio bass level
MIX
Set/get audio mix setting (stereo / mono)
MUTE
Set/get audio mute setting
TREBLE
Set/get audio treble level
VOLUME
Set/get simple audio volume
Kramer Electronics Ltd.
Transparency
Public
Public
Port
118