Kramer VS-3232DN-EM User Manual page 36

4. Press TAKE.
The following is displayed:
current matrix stage
store as DEFAULT setup
This indicates that the current setup is stored as the default setup. After a few seconds
the next option on the Config Menu is displayed.
Config Menu—Total Matrix Reset
This option lets you turn all outputs off or reset the unit to its factory default settings.
To reset the matrix setup:
1. Press MENU twice.
The following message is displayed:
start configuration menu
MENU to view setup ENT to change them
2. Press MENU until the following is displayed:
TOTAL MATRIX RESET
ESC: exit
3. Press ENT to enter the Reset Submenu.
The following is displayed:
COMPLETELY MATRIX RESET
1:ALL outputs OFF
4. Press 1 to turn off all outputs or 2 to perform a factory reset of all options.
Selecting option 2 to perform a factory default reset clears all setups, options and
configuration.
5. Press TAKE and wait a few seconds.
The following is displayed:
Are you Absolutely sure !!!
Once more TAKE to confirm
6. Press TAKE.
The following is displayed:
Matrix erased!!!
Please, wait ...
The matrix and device configuration are erased. After a few seconds the next option on
the Config Menu is displayed.
Config Menu—Display Firmware Versions
This option displays the main and front firmware versions.
To display the firmware versions:
1. Press MENU twice.
The following message is displayed:
start configuration menu
MENU to view setup ENT to change them
VS-3232DN-EM – Using the Configuration Menus
ENT = submenu
2:Factory default
Kramer Electronics Ltd.
33