Kramer VS-3232DN-EM User Manual page 111

MODULE-TYPE
Functions
MODULE-TYPE
Set
MODULE-TYPE?
Get
Description
Set module type and slot location
Set
Get Get module type and status by slot location
Response
~nn@MODULE-TYPESPm_id,m_type,statusCR LF
Parameters
m_id – Module ID (slot number): 0 (control module), 1-16 (I/O cards), 200 (test module),
201 (keyboard software application), 202 (keyboard hardware)
m_type – Module type: 0 (DVI), 1 (HDCP), 03 (HDMI), 4 (DL), 09 (F610), 10 (F670), 12 (DGKat),
18 (VGAA), 22 (AAD), 24 (HAA), 25 (HAD), 30 (HDBT), 32 (SDIA), 34 (DT), 41 (UHD), 42 (UHDA),
45 (DTAxr), 47 (control module)
status – Module status: 0 (OK), 1 (unknown error), 2 (no communication), 3 (module missing)
Response Trigger
Notes
K-Config Example
Set the card (module) installed in slot 4 to HDBT:
"#MODULE-TYPE 04,30",0x0D
MODULE-VER
Functions
Set -
MODULE-VER?
Get
Description
Set -
Get
Get module firmware version
Response
~nn@MODULE-VERSPm_id,FW_versionCR LF
Parameters
m_id – Module ID (slot number): 0 (control module), 1-16 (I/O cards), 200 (test module),
201 (keyboard software application), 202 (keyboard hardware)
FW_version – XX.XX.XXXX where the digit groups are: major.minor.build version
Response Trigger
Notes
K-Config Example
"#MODULE-VER? 15",0x0D
VS-3232DN-EM – Protocol 3000
Permission
Admin
End User
Syntax
#MODULE-TYPESPm_id,m_typeCR
#MODULE-TYPE?SPm_idCR
Permission Transparency
- -
End User Public
Syntax
-
#MODULE-VER?SPm_idCR
Kramer Electronics Ltd.
Transparency
Public
Public
108