Routing Commands - Kramer VS-3232DN-EM User Manual

Routing Commands

DISPLAY
Functions
Set -
DISPLAY?
Get
Description
Set -
Get Get validity status of output
Response
~nn@DISPLAYSPout_id,validity_flagCR LF
Parameters
out_id – output number: 1-32 (varies according to installed output cards, see
Numbering on page 14)
validity_flag – validity status of output: 0 (output is invalid – HPD off), 1 (output is valid – HPD on)
Response Trigger
A response is sent to the com port from which the Get was received, after command execution and:
After every change in output HPD status from on to off (0)
After every change in output HPD status from off to on (1)
Notes
K-Config Example
Get the validity status of output 8:
"#DISPLAY 8",0x0D
VS-3232DN-EM – Protocol 3000
Command Description
DISPLAY
Get validity status of output
INFO-IO
Read in/out count
INFO-PRST
Read max preset count
PRST-LST
Read saved presets list
PRST-RCL
Recall saved preset
PRST-STO
Store current connections to preset
PRST-VID
Read video connections from saved preset
SIGNAL
Valid / Invalid input
VID
Switch Video only
Permission
-
End User
Syntax
-
#DISPLAY?SPout_idCR
Port
Kramer Electronics Ltd.
Transparency
-
Public
109