Kramer VS-3232DN-EM User Manual page 118

Video Commands
BRIGHTNESS
Functions
BRIGHTNESS
Set
BRIGHTNESS?
Get
Description
Set brightness value
Set
Get
Get brightness value
Response
~nn@BRIGHTNESSSPstage,channel,valueCR LF
Parameters
stage – 1/IN (input), 2/OUT (output)
channel – input or output number: 1-32 (varies according to installed input / output cards, see
Numbering on page 14)
value – brightness in Kramer units: 0-63, ++ (increase current value), -- (decrease current value)
Response Trigger
Notes
A minus sign precedes negative values
This command is only valid for VGA cards
K-Config Example
Set the brightness value of output 8 to 60:
"#BRIGHTNESS 2,8,60",0x0D
Increase the brightness value of input 5 by 1 unit:
"#BRIGHTNESS 1,5,++",0x0D
VS-3232DN-EM – Protocol 3000
Command Description
BRIGHTNESS
Set/get brightness value
CONTRAST
Set/get contrast value
DETAIL-TIMING
Set/get detailed timing parameters
H-PHASE
Set/get H-Phase value
Permission
End User
End User
Syntax
#BRIGHTNESSSPstage,channel,valueCR
#BRIGHTNESS?SPstage,channelCR
Kramer Electronics Ltd.
Transparency
Public
Public
Port
115